How To Connect A Canon Camera To An Hd Tv

Viewing images on a standard TV (using an [AV Cablevision] or [Stereo AV Cable])

Using an [AV Cable]* or [Stereo AV Cablevision]* supplied with the camera, yous can connect the camera to a Boob tube to view the captured images.

* For data nigh which cable is supplied with your camera, please check the table at the end of this department.

Important:

1. Turn off the camera and the TV.

2. Connect the supplied [AV Cable] or [Stereo AV Cablevision] to the camera'south [A/V OUT] terminal or [A/V OUT / DIGITAL] terminal.

3. Connect the [AV Cable] or [Stereo AV Cable] to a TV's video-in concluding and audio-in concluding.

- Connecting to a Television receiver with an [AV Cable] (monaural)

Plug the yellow terminal of the [AV Cable] into the VIDEO IN jack on the TV.

Plug the blackness terminal of the [AV Cable] into the AUDIO IN jack on the TV. If the TV has two AUDIO IN jacks (for right and left), plug the AV Cable to either ane of them.

- Connecting to a TV with a [Stereo AV Cable] (stereo)

Plug the yellow final of the [Stereo AV Cablevision] into the VIDEO IN jack (Yellow) on the Idiot box.

Plug the white terminal of the [Stereo AV Cable] into the AUDIO IN jack (Left) (White) on the Goggle box.

Plug the scarlet terminal of the [Stereo AV Cable] into the AUDIO IN jack (Right) (Red) on the Idiot box.

iv. Turn on the TV and switch information technology to video fashion.

5. Printing the <playback> () button to plough on the photographic camera.

The epitome will appear on the Idiot box (nothing volition appear on the screen of the camera).

When you want to end playing back images, turn off the camera and the Television receiver kickoff before removing the [AV Cablevision] or [Stereo AV Cable].

Viewing images on an Hard disk drive (High-Definition) TV (using an HDMI Cable) You can view images but with the supported models. For information nearly whether your camera supports HDMI connection, please check the tabular array at the terminate of this section.

Past using the HDMI Cable [HTC-100] (sold separately), you tin can connect the camera to a loftier-definition Goggle box and enhance your viewing experience.

When you connect the camera to an HDMI CEC compatible TV, you tin use the TV's remote control to operate the photographic camera and play back images or view slideshows.

Important:

Operation sounds will not play when continued to a high-definition Television.
Some TVs may not exist able to control the camera properly even though they are HDMI CEC compatible.

Note:

Using the HDMI CEC function

You lot may need to brand settings on some TVs. For details, refer to the user guide supplied with the TV.
When using the HDMI CEC office, follow the steps beneath to brand settings before connecting the photographic camera to a TV.

ane. Printing the <> button to brandish the window below.

two. Operate the <directional buttons> to select the [Prepare] () tab, and set [Ctrl via HDMI] to [Enable].

3. Press the <> push button.

1. Plow off the photographic camera and the Television set.

ii. Connect the HDMI Cable [HTC-100] (sold separately) to the camera'due south [HDMI Final].

three. Connect the HDMI Cable [HTC-100] (sold separately) to a high-definition TV's [HDMI Final].

four. Turn on the Television receiver and switch information technology to HDMI style.

5. Press the <playback> () push to turn on the camera.

The image will appear on the Television (nothing will announced on the screen of the camera).

Note:

While the HDMI CEC function is in apply, operate the photographic camera with the Idiot box's remote command.

Printing the remote control's <Directional buttons> right and left to choose an image.
Press the OK/Select button to display the camera control panel. Press the <Directional buttons> right and left to choose an item, then printing the OK/Select button again.

[Render] : Closes the menu.

[Group playback] : Displays groups of High-speed Flare-up images (merely appears when grouped images are chosen).

[Play Motion picture] : Plays a movie (only appears when a motion picture is chosen).

[Slideshow] : Plays back images automatically. During playback, you lot can press the remote command's <Directional buttons> right and left to switch images.

[Index Playback] : Displays images in an index.

[Change Display] : Changes the screen display.

If you operate the controls on the camera, you will not be able to control the camera with the TV's remote control until you render to single image playback.

For information about which cable is supplied with your photographic camera, and whether your photographic camera supports HDMI connection, delight cheque the table below.

... Supported

... Not supported

Models	Cables supplied with the camera Back		HDMI Back
Models	AV Cable (Monaural)	Stereo AV Cable (Stereo)	Connection supported	HDMI CEC
PowerShot ELPH 100 HS / IXUS 115 HS
PowerShot ELPH 300 HS / IXUS 220 HS
PowerShot A800 PowerShot A1200 PowerShot A2200 PowerShot A3200 IS PowerShot A3300 IS
PowerShot SX220 HS PowerShot SX230 HS